For your industrial valves: advise, sales and service

EURAD distinguishes itself by taking responsibility for the proper functioning of systems with regard to the recommended valves.

EURAD determines the valve recommendations based on the customer's specifications and operating conditions in the system. Also, where possible, take account of any changing circumstances in the future. As such EURAD relieves its clients from both general and complex valve issues that can occur in different industries.

EURAD represents several international valve manufacturers and can therefore provide its clients the optimum valve and guarantee it for the specified application.

EURAD advises and supplies according to your specified application the best industrial valve when it comes to:

• control (cooling) water flows in discharge pipelines and pumping stations
• block (cooling) water flows in discharge pipelines and pumping stations
• prevent backflow in discharge pipelines and pumping stations
• avoid or limiting pressure increase by water hammer in discharge pipelines
• reduction of pressure loss in the discharge pipelines by venting air
• control of process gases and liquids
• block of process gases and liquids
• prevent back flow of process gases and fluids

 
EURAD advises and provides technical support for controlling gas and liquid flows:

• in temperature ranges from minus 200 °C to plus 1000 °C
• in the pressure range from vacuum to 100 Barg i.e. DIN PN10 to DIN PN100 / ANSI Class 150 to ANSI Class 600 / DIN 24154 T2R2/R4
• in leakage rates according class DIN 3230 / 2% to 0.02% of Kv
• in pipe diameters from 50 mm up to 3000 mm

The industrial valves are supplied in the internationally used classifications:

• face to face dimensions according: DIN 3202 / ISO 5752 / API 609 / B16.10 / MSS-SP-68 / DIN 24154
• end connections according: DIN 2501 / ISO 7005 / B 16.5 / API / MSS SP-44 / weld ends

 
The industrial valves can be supplied with all internationally accepted certification for:

• calculations according: TRD 110 / DIN 3840 / ASME SEC.VIII / SEC.III ASME / ANSI B31.1 / ANSI B31.1 / API 609
• material according: EN 10204-3.1
• testing according: EN 10204-3.1 / DIN ISO 9001 / ISO 15848-1 / BAM / Fire safe according to API 607
• quality management according: DIN EN ISO 9001 / ANSI ISO Q9001